Sunday, September 15, 2013

Capacitor Switched Regenerative Snubber Ckt for Dc/Dc Boost Converter

1. INTRODUCTION High- government agency dc/dc converters are a authoritative component of todays rising vehicular technologies much(prenominal) as hybrid-electric, battery-electric, and arouse-cell vehicles. Typically, a voltage rising dip is need to maltreat up the low voltage of the fuel cell or battery to the gamey voltage required by the grip motor inverter. For these it is necessary that the size and quite a little of the converter should be small to facilitate packaging. This is due to the last business leader parsimoniousness and to provide higher fuel prudence due to cut down vehicular crapper. Furthermore, the converter should ingest a simple aim with high-efficiency operation over the whole load range. The large peaceful components employ in high-voltage dc/dc advertise converters, specifically the large boost inductor, comprise a major(ip) part of the mass of the converter. Higher absolute frequency operation helps in reducing the size of the pa ssive components. further there are 2 major obstacles to achieving high-frequency operation of the high power dc/dc converters. First, the switching losses amplification proportionally with the increase frequency, which reduces the converter efficiency and increases the chill requirements. A large cooling system adds to the overall cost and mass of the converter system.
Ordercustompaper.com is a professional essay writing service at which you can buy essays on any topics and disciplines! All custom essays are written by professional writers!
Second, the high power insulated gate bipolar transistors (IGBTs) used in these converters are limited to hard-switching operation at around 30 kilohertz or less , depending on the power level. In pose to overcome all these drawbacks possessed by the c onventional dc/dc boost converters, these ar! e replaced by the capacitor switched regenerative snubber circuited dc/dc boost converters A.BASIC CONCEPTS OF CONVERTERS Converter is an electronic circuit which converts a source of alternating or localise current (AC or DC) from one voltage level to another. It is a class of power converter. DC/DC converters can be classified into two types. They are: a) boost converters b) buck converters. A boost converter (step-up converter) is a DC-DC...If you want to get a full essay, align it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper

No comments:

Post a Comment